Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateTrusted Gate Installation for West Covina Homeowners
A new gate with West Covina Gate Installation typically costs between $2,800 and $9,500 installed, depending on width, material, and whether you’re adding automation. Most installations run one to two days from layout to final cleanup. Carver Gate Repair West Covina has handled gate work exclusively since 2008, operating to The Garrison Standard. That means a written price before any work starts, background-checked technicians on every job, and a one-year written guarantee on the installation. Lonnie Burke leads the crew here, and the phone at (925) 268-7956 is answered by a live person around the clock.
We’re not a general contractor fitting gate work in between bathroom remodels. Gates are the whole job. That focus shows in the details: squared posts, proper gate sag prevention, limit switches set correctly on day one, and a clean site when the crew leaves. Homeowners across West Covina call us after a cheaper install fails or a no-show wastes a full day. Our home page lays out the full scope of what we do, but the short version is this: if it hangs, slides, swings, or opens automatically, we install it and stand behind it.
Automatic Gate Installation
Automatic Gate Installation means adding a motor, control board, safety devices, and access controls to a gate so it opens and closes without anyone getting out of a vehicle. In West Covina, this work typically runs $1,800 to $4,500 when the gate structure already exists, and $4,500 to $9,500 when we’re building the gate and automating it in the same job.
Operator Selection by Gate Type
A swing gate needs an articulating arm or underground operator. A slide gate needs a rack-and-pinion or chain-drive unit. Carver Gate Repair West Covina matches the operator to the gate’s weight, width, and duty cycle, so you’re not paying for a motor that burns out in eighteen months. We train on Viking, Ghost Controls, and DoorKing equipment, among others.
Safety Requirements for Automated Gates
Any automated gate in a residential setting must have UL 325-compliant safety entrapment protection. That means photo eyes, contact edges, or both. We wire these into the control board and test them before we leave. Skipping this step is how people get hurt, and we won’t do it.
Styles & brands we work with
Gate Installation Services
Gate Installation Services cover everything from measuring and ordering the right gate to pouring footings, hanging the gate, setting operators, and programming remotes. For a standard driveway gate in West Covina, budget $2,800 to $6,500. Larger ornamental steel or custom wood gates with automation run $6,500 to $9,500 or more depending on span and hardware.
What a Written Quote Includes
Our price is delivered in writing before any work begins. It breaks out material, concrete, hardware, operator, and labor by line item. The number you sign off on is the number you pay. No surprise add-ons when the gate is already off its hinges.
Home Versus Commercial Work
Residential gate installation is our primary workload in West Covina, but we also handle small commercial jobs for apartment complexes and small lots. The process is the same: written quote, scheduled arrival, clean site. Commercial operators like Elite and Linear are in our regular rotation.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Electric Gate Installation
Electric Gate Installation is the full electrical side of an automated gate: running conduit, pulling wire, installing the control board, wiring photo eyes and loop detectors, and connecting the operator. In West Covina, the electrical portion of a gate project typically costs $1,200 to $3,200, separate from the gate structure itself.
Power Runs and Conduit
Most West Covina homes need a dedicated circuit run from the main panel to the gate location. We handle the trenching, conduit, and proper depth per local code. If you already have power at the gate, we verify the circuit is sized correctly for the operator before we connect anything.
Loop Detectors and Keypads
A loop detector is a wire coil buried in the driveway that tells the gate to open when a car sits on it. Keypads and remotes are the other common access options. Carver Gate Repair West Covina installs and programs all three, plus intercom systems for homes where the gate sits far from the house.
Driveway Gate Installation
Driveway Gate Installation replaces the standard driveway opening with a functional, secured entry point. Most West Covina driveway gates are either single-swing or bi-parting swing gates across a 12 to 20 foot opening. A single swing driveway gate with manual hardware starts around $2,800, while an automated bi-parting gate runs $5,500 to $9,500 installed.
Material Choices for West Covina Weather
Steel with a powder-coat finish holds up best against the heat and dry air in this part of the San Gabriel Valley. Wrought iron style gates are popular in the South Hills neighborhoods. We recommend steel over wood for driveway gates in West Covina because wood gates that wide tend to sag and warp within a few seasons of sun exposure.
Post Footings Done Right
A gate post in sandy or shifting soil needs a deeper footing and more concrete than most installers bother with. We dig below the frost line, use proper rebar, and let the concrete cure before hanging the gate. Rushed footings are the number one reason a six-month-old gate starts dragging.
Sliding Gate Installation
Sliding Gate Installation mounts a gate on a track and rollers so it moves horizontally instead of swinging outward. This is the right choice for West Covina driveways that slope upward from the street, or where the driveway is too short for a swing gate’s arc. Sliding gate installs typically run $4,000 to $9,500, with the higher end covering automated, heavy-gauge steel gates.
Track Systems and Cantilever Options
A track-guided slide gate rides on wheels along a steel track set into the driveway. A cantilever slide gate floats above the ground on rollers mounted to posts, so the track never fills with dirt or gets blocked by a parked car. We install both, and we’ll tell you which one fits your driveway before you spend a dollar.
When Sliding Beats Swinging
If your driveway climbs more than about six degrees, a swing gate’s bottom edge will bind on the ground partway through its arc. Sliding gates don’t care about grade. That’s why you see so many of them in the hills above Cameron Avenue and around Galster Park.
Gate Opener Installation
Gate Opener Installation delivers automated operation to a manual gate or replaces an old, failing opener on an existing automated gate. In West Covina, a new gate opener with installation runs $1,800 to $3,500. Replacing an existing operator with a comparable model lands between $1,400 and $2,800.
Matching the Opener to the Gate
An opener that’s undersized for the gate’s weight will grind itself to death in a couple of years. We calculate gate weight, wind load, and duty cycle before recommending a unit. A light aluminum pedestrian gate takes a very different operator than a 20-foot steel driveway gate. DoorKing and Viking units handle heavier loads well.
Old Opener Replacement
If your existing opener is more than 12 years old, parts are getting scarce and safety standards have moved. We’ll remove the old unit, check the gate’s hardware and hinges, and install a new operator with current UL 325 safety devices. The old brackets usually come out with an angle grinder, which is straightforward work for our crew.
Gate Fabrication
Gate Fabrication means building a gate to order rather than modifying a stock unit to fit. Custom fabrication in West Covina runs $3,500 to $9,500 depending on size, material gauge, and design complexity. This is the right route when your opening is an unusual width, or you want a specific look that matches your home’s architecture.
Steel Gauge and Frame Construction
A well-built gate starts with a frame of 1.5-inch or 2-inch square steel tubing, at least 14 gauge, with pickets or infill panels welded in. Corners should be mitered and welded on all four sides, not just tacked. Lightweight ornamental gates bend when a teenager leans on them. We fabricate for strength first, appearance second, and the appearance takes care of itself.
Custom Design Without the Runaround
You tell us the style you want, or bring a photo of a gate you’ve seen in West Covina. We draw it up, quote a firm price, and build it in our shop. The finished gate arrives painted or powder-coated, ready to hang. No three-month waits and no “we’ll get back to you” from a fabricator who’s too busy to answer the phone.
Brands We Service
We install and service Viking gate openers regularly in West Covina. Viking’s slide gate operators are common on larger residential properties, and we keep their control boards and limit switches in stock. Their swing arm operators are a solid mid-range choice that we’re comfortable programming from day one.
Ghost Controls and DoorKing are the other two brands we reach for most often. Ghost Controls kits work well for light to medium single-swing gates where budget matters. DoorKing handles heavier commercial-style gates and has a control board interface our technicians know cold. We also work on Elite operators when a property already has one in place. Whether you have a Viking, Ghost Controls, DoorKing, Elite, or any other make, we can match the right components to what’s already on your property.
See the difference
Before
After
Before
After
Before
AfterSigns You Need a Pro Right Now
- The gate scrapes the ground halfway through its swing. This means the post has shifted or the hinges are failing. Every week it gets worse, and eventually the gate won’t latch. A pro can reset the post or install heavier hinges before the gate drops entirely.
- The opener runs but the gate barely moves. That’s usually a stripped gear, a failing capacitor, or a chain that’s stretched past adjustment. Running it in this condition overheats the motor and shortens its life. This is a repair call, not a wait-and-see situation.
- You’re propping the gate open with a cinder block. When the gate won’t stay closed on its own, you’ve lost both security and pet containment. The fix might be a latch, a closer, or a full hinge replacement. Either way, a gate that won’t close is a gate that isn’t doing its job.
- Water pools at the base of the gate post. Standing water rots wood posts and corrodes steel ones. In West Covina’s clay-heavy soil, poor drainage around a post shortens its life by years. We can regrade the area or set a new post with drainage accounted for.
- The gate opener makes a grinding noise every cycle. Grinding means metal-on-metal contact that shouldn’t be happening. It’s usually a bearing, a gear, or a misaligned chain. Left alone, it seizes the operator. Replacing a bearing is cheap; replacing the whole unit is not. Gate Installation in Arcadia faces the same failure pattern, and catching it early is the difference between a $200 fix and a $2,500 replacement.
Our Process, Step by Step
- 1
Measure and assess. We measure the opening width, check the grade, inspect existing posts and footings, and note where power will come from. This visit is free. You get a written quote based on what we actually saw, not a guess over the phone.
- 2
Written price and schedule. We send the quote with a line-item breakdown. You approve it, we schedule a date and arrival window. The price does not change once work starts. That’s The Garrison Code, and it’s non-negotiable.
- 3
Site prep and concrete. If new posts are needed, we dig footings, set rebar, and pour concrete. We let the concrete cure before hanging anything on it. Some crews hang gates the same day they pour; those gates sag within six months.
- 4
Gate installation and automation. We hang the gate, set the limit switches so it opens and closes fully without slamming, wire the photo eyes and keypad, and program remotes. We test the auto-reverse and entrapment protection before we call the job done.
- 5
Walkthrough and cleanup. You see the gate operate, we hand you the remotes and manual, and you sign off. The site is swept clean. Your written guarantee starts that day and runs for a full year. If anything fails inside that window, the second visit is free.
How Much Does Gate Installation Cost in West Covina?
A typical manual single swing gate in West Covina runs $2,800 to $4,500. Add automation and the total lands between $4,500 and $7,500. A custom fabricated steel gate with a Viking or DoorKing operator across a wide driveway runs $6,500 to $9,500. These ranges cover most residential jobs we quote in this city.
What moves the price is gate width, material gauge, whether the post footings are new or existing, and how far the electrical run needs to travel from the panel. Ornamental details like arched tops, scrollwork, or custom powder-coat colors also add cost. The best way to avoid overpaying is to get a line-item quote with clear Gate Installation pricing and compare it against another one. If a quote lumps everything into one number, you can’t tell what you’re actually buying.
A free estimate from Carver Gate Repair West Covina includes measurements, a written price, and a breakdown of materials and labor. We don’t charge to come look at the job, and the estimate comes with no obligation. Call Gate Installation in Glendora customers know us for the same thing: a real number, in writing, before any work starts.
Our Service Area Near West Covina
Carver Gate Repair West Covina covers West Covina and the surrounding San Gabriel Valley communities. We’re regularly in Covina, San Dimas, Whittier, Azusa, San Gabriel, Pomona, South Whittier, Diamond Bar, and Hacienda Heights. For most of these areas, we can schedule a free measure and estimate within a few business days. If you’re in one of the closer cities like Covina or San Dimas, that’s usually a same-week visit. Gate Installation in West Covina remains our core service area, but the crew travels throughout the whole region.
Serving West Covina, CA - Our Local Coverage Area
We’re based in the West Covina area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions About Gate Installation in West Covina
Gate installation is the process of setting posts, hanging a gate, and optionally adding automation so the gate opens with a remote, keypad, or sensor. It includes concrete work, hardware, electrical wiring, and safety device setup when automation is involved. A proper installation accounts for the gate’s weight, the driveway’s slope, and the local soil conditions in West Covina.
A standard single driveway gate with manual hardware takes one full day once footings are cured. If we’re pouring new footings, add two to three days for concrete to reach strength before the gate gets hung. Full custom fabrication with automation typically runs one to two weeks from order to finished install, depending on the fabrication schedule.
A manual gate install runs $2,800 to $4,500. An automated gate runs $4,500 to $9,500 for most residential properties in West Covina. Your exact price depends on gate width, material, and whether automation is part of the job. The written quote you receive before work starts is the price you pay. Call (925) 268-7956 for a free estimate.
Yes. We install and service Viking, DoorKing, Ghost Controls, Elite, and several other brands. Our technicians are trained on the programming menus and common failure points for each one. If you already have an opener and want a new gate matched to it, we can do that too.
If a failed gate has left your property unsecured, we treat that as a priority call. A live person answers (925) 268-7956 at any hour, and we can often get a technician out same-day for a temporary secure or a repair that holds until a full replacement is scheduled. Full installations from scratch are scheduled, not rushed, because footings and curing time can’t be cut short.
Every installation from Carver Gate Repair West Covina carries a written one-year guarantee. If anything fails within that year due to our workmanship or the components we supplied, we return and fix it at no charge. That’s the 365-Day Done Right Promise, and it’s in writing on every job.
Clear the area around the gate opening so we have room to work, and let us know if there are buried utilities near the driveway before we dig. Have a plan for pets during the installation window, especially if the gate will be off its hinges for a few hours. Beyond that, we handle everything from permits to cleanup. You don’t need to be home for the whole job, but we do need you there for the final walkthrough and remote programming.
Schedule Your Gate Installation Service in West Covina Today
Call (925) 268-7956 and a live person will pick up, day or night. We’ll schedule a free on-site measure, hand you a written price before any work begins, and stand behind the install for a full year. If you’re ready to replace a sagging gate or add automation to your driveway, the next step is a phone call.
Written by Lonnie Burke, Owner at Carver Gate Repair West Covina, serving West Covina since 2008.