Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterAutomatic Gate Repair in West Covina, CA
Automatic gate repair in West Covina typically costs between $185 and $650 depending on whether the issue is a bad limit switch, a worn gear, a failed circuit board, or a full motor replacement. Most repairs take under two hours once the technician has the right part on the truck. If your gate is stuck open, stuck closed, or moving erratically, call Carver Gate Repair West Covina at (925) 268-7956 and we’ll dispatch a background-checked technician to your property.
We are the Gate Repair in West Covina specialists, and we work exclusively on gates and gate motors. That narrow focus matters when a Viking control board fails on a Sunday night or a Ghost Controls arm has lost its limit settings and the gate slams into the post. You’ll get a written price before we touch a screwdriver, and the repair is backed by a written guarantee for a full year.
When You Need Automatic Gate Repair
Most automatic gate problems announce themselves early. Here’s what West Covina homeowners call us about most often:
- The gate stops mid-travel and reverses direction. This usually points to a failing limit switch or a photo eye that has drifted out of alignment. In the hills above Cameron Park and around South Hills, morning dew and temperature swings make this worse over time.
- The motor hums but the gate doesn’t move. A stripped drive gear or a slipping chain is the typical culprit. You’ll hear the operator running, but the gate stays put.
- The gate opens on its own or won’t respond to the remote. Loop detectors buried in the driveway can fail intermittently, or the receiver board may be picking up interference from a nearby signal. Around the shopping corridors off Azusa Avenue, this is more common than most people expect.
- The gate moves slowly or jerks as it travels. Worn rollers, debris packed into the track, or a motor capacitor on its way out. If left alone, the operator works harder and burns out sooner.
- The keypad works but the remote doesn’t, or vice versa. This usually isolates the failure to one input channel on the control board, not the motor itself.
- The gate was hit by a car or a delivery truck. Even a low-speed impact can bend the track, knock an articulating arm out of alignment, or shear a hinge pin. The gate may still run, but it’s damaging itself with every cycle.
If any of these sound familiar, don’t wait for the gate to fail completely. A gate stuck in the open position leaves your property exposed. A gate stuck closed traps you or your vehicles. Call (925) 268-7956 and a live person answers, any time of day or night, weekends and holidays included.
Our Automatic Gate Repair Process
We run every Gate Repair services job to The Garrison Standard. That means a written price before work starts, a uniformed technician who has passed a background check, and a guarantee in writing when the job is done. Here’s the sequence:
- You call, a person answers. No voicemail tree, no answering service that takes a message and hopes for the best. We document the symptoms, the gate brand if you know it, and set an arrival window.
- Diagnosis on site. The technician tests the operator, limit switches, loop detector, photo eyes, and the mechanical components. On DoorKing and Elite systems, we check the control board for fault codes before touching anything else.
- Written price, explained plainly. You get a dollar figure in writing. If the fix is a $40 limit switch and 30 minutes of labor, that’s what the quote reflects. If the motor is beyond saving, we’ll tell you that too, with options and prices for each path.
- The repair. We carry parts for Viking, Ghost Controls, DoorKing, and Elite systems, among others, so most jobs are completed on the first visit. The work area is left clean.
- Written guarantee. Every repair carries a 365-day guarantee. If the same problem recurs inside that year, the second visit is free. No charge, no argument.
That last point is The Garrison Code, and it’s non-negotiable. We put it in writing because that’s the only way a guarantee means anything.
Automatic Gate Repair Pricing in West Covina
Here’s How Much Does Gate Repair Cost? (2026 Price Guide) - West Covina, CA in the West Covina area. These are honest ranges based on the work we see most often, not teaser numbers meant to get a technician on your property:
- Limit switch replacement: $185 to $285. The switch tells the motor where to stop. When it fails, the gate over-travels and slams.
- Photo eye alignment or replacement: $150 to $275. The safety sensor that prevents the gate from closing on a car or person.
- Drive gear or chain replacement: $260 to $420. Common on swing gates and slide gates that have run for years without a gear service.
- Control board repair or replacement: $320 to $650. This is the brain of the system. Brand matters here, and a Viking or DoorKing board costs more than an off-brand equivalent because it’s built to last.
- Loop detector replacement: $240 to $380. The wire loop buried in the driveway that tells the gate a car is present. West Covina’s clay-heavy soil in some neighborhoods can accelerate wire fatigue.
- Full motor replacement: $550 to $1,400 depending on the operator type and brand. A linear arm for a residential swing gate sits at the lower end; a commercial-grade slide operator for a long driveway runs higher.
What affects cost: the age of the system, whether the part is in stock on our truck, and how accessible the operator is. A gate motor mounted at ground level in a clean enclosure is a faster job than one bolted to a hillside post. We don’t charge a trip fee when the repair moves forward, and estimates are free. Call (925) 268-7956 with your symptoms and we’ll give you a realistic range before we roll a truck.
Why Automatic Gates Fail in West Covina
West Covina’s climate does specific things to Electric Gate Repair hardware. The summer heat out by the 10 freeway corridor bakes exposed control boards and shortens capacitor life. The marine layer that pushes inland in the mornings leaves condensation on photo eye lenses and limit switch contacts, especially in the lower-lying neighborhoods near the 60. And the fine particulate dust from the San Gabriel Valley foothills works its way into gear housings and turns grease into grinding paste.
None of this is dramatic. It’s just the environment we work in every day, and it’s why a gate that works fine in a mild coastal climate needs more attention here. When we service a Ghost Controls or Viking system in West Covina, we account for that local wear pattern in the Gate Realignment diagnosis and in the parts we recommend.
FAQs – Automatic Gate Repair
How much does automatic gate repair cost in West Covina?
Automatic gate repair in West Covina typically costs between $185 and $650, with most common fixes like limit switches, photo eyes, and drive gears landing in the $150 to $420 range. Full motor replacement runs $550 to $1,400 depending on the brand and operator type. Call (925) 268-7956 for an exact quote based on your symptoms; estimates are free and the price is in writing before work starts.
Can you fix my automatic gate the same day?
In most cases, yes. We keep common parts for Viking, Ghost Controls, DoorKing, and Elite systems on our trucks, which means the technician who arrives at your door is usually the one who fixes the gate on that same visit. When a part isn’t on the truck, we source it locally or order it and return within the week. Call us with your gate’s brand and symptoms and we’ll tell you what to expect before anyone drives out.
Is it cheaper to repair or replace an automatic gate motor?
If the motor itself has failed and the operator is more than 10 to 12 years old, replacement is usually the smarter money. Repairing a tired motor often means replacing the capacitor, the gear, and the limit switch within a year anyway, and those costs add up quickly. We’ll show you the numbers for both paths, in writing, and you decide. No pressure, no upselling.
What brands do you work on?
Our technicians are trained on nine gate-motor brands, including Viking, Ghost Controls, DoorKing, Elite, LiftMaster, FAAC, BFT, Linear, and Mighty Mule. That means we’re matching the right parts and the right diagnostic approach to the system already installed on your property, not improvising with whatever is in the truck.
Is an automatic gate that won’t close a security risk?
Yes. A gate stuck open does not secure anything. If your gate fails in the open position, treat it as a priority repair. Our phones are answered by a live person 24/7, so you can report the issue at 3 a.m. and we’ll get a technician scheduled.
Why West Covina Calls Carver Gate Repair
Automatic gate systems mix electrical work, mechanical work, and safety logic in a way that generalist handymen and general contractors aren’t set up to handle. We are. Gates are all we do. Every technician arrives in uniform, has passed a background check, and carries the written-price promise that got this company its reputation. Since 2008, the Garrison Partners family has operated to a single standard: written prices, written guarantees, no moving numbers, no no-shows.
Lonnie Burke runs the West Covina operation. When you call (925) 268-7956, you’re calling a local crew that works under The Garrison Standard, with a 365-Day Done Right Promise in writing on every repair. If it’s not done right, we make it right. Free. That’s not a slogan; it’s the terms of the job.
If your automatic gate is acting up, don’t wait for the motor to seize or the gate to slam into a car. Call now for a free estimate. A real person answers.
Written by Lonnie Burke, Owner at Carver Gate Repair West Covina, serving West Covina.