Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateWhy West Covina Homeowners Choose Ghost Controls Gate Repair
Carver Gate Repair West Covina provides independent Ghost Controls service in West Covina, from the ranch tracts near the San Bernardino Freeway up into the South Hills. We work on Ghost Controls swing and slide operators daily, which means we stock the parts that fail most often and we know the failure patterns before we arrive. We are not affiliated with or authorized by Ghost Controls. We are an independent service provider, and we answer the phone 24/7 at (925) 268-7956.

Ghost Controls builds solid openers for residential gates, especially their solar-ready swing arm kits. But West Covina’s inland heat, Santa Ana wind days, and hillside-grade driveways put a specific kind of strain on those operators. That strain shows up as control board failures after power surges, limit switch drift on dual-arm setups, and corroded battery terminals on solar models. Most owners don’t discover the problem until the gate stops mid-cycle or refuses to close at night. Lonnie Burke and our crew have been servicing West Covina properties for well over a decade, including repeat work near South Hills Country Club where older slide gates need more attention than their owners expect. We diagnose the fault correctly the first time, quote a written price before any work starts, and back every Ghost Controls repair with our 365-Day Done Right Promise in writing.
Why Trust Carver Gate Repair West Covina for Your Ghost Controls Gate Repair?
Most gate companies treat Ghost Controls as an afterthought. They show up, look at the opener, and start swapping parts hoping something works. That’s not how we operate. Our technicians open Ghost Controls TDS2XP and TSS1XP swing arm housings weekly. We know the internal limit switch layout, the control board revision differences, and the specific way the RTE-S1 solar retractable model behaves when its charging circuit degrades. When a Ghost Controls gate misbehaves in West Covina, we diagnose the cause, not the symptom.
We install OEM Ghost Controls parts when turnaround and availability make that the right call. We also use high-quality aftermarket control boards, limit switches, and remotes that match or exceed OEM specifications and cost less. Either way, you get a written price before the work begins and a written guarantee on every repair, good for a full year. If the repair fails inside that window, the second visit is free. No charge, no argument. Lonnie Burke built this crew around accurate first-time diagnosis because paying twice for the same problem is the thing that drives homeowners up the wall. The gate either works right or it doesn’t – there’s not much in between.
Every technician who arrives at your West Covina driveway is background-checked and in uniform. You know who is coming through the gate before they open it. That matters when you’ve had no-shows and moving prices before.
Styles & brands we work with





Common Ghost Controls Gate Repair Problems We Fix in West Covina
- Control board failure after power surges. Southern California Edison switching events and lightning-adjacent storms send voltage spikes into gate control boards. Ghost Controls boards are not especially surge-hardened. The typical presentation is a flashing red status LED and no motor response at the keypad or remote. We replace the board, check the transformer and wiring for secondary damage, and often recommend a surge suppressor at the outlet. In West Covina’s hillside neighborhoods, we see this failure more than any other.
- Limit switch drift on TDS2/TSS2 dual swing arm systems. The left and right arms each carry a mechanical or magnetic limit switch. Over time, and especially on gates that run multiple cycles a day, these switches drift. The gate stops short of the closed position, or the leaf slams against the post. On a hillside driveway, a gate that slams is a gate that bends a hinge. We replace both limit switches as a set, then recalibrate travel so the leaves close evenly.
- Water intrusion in battery compartments on solar models. The RTE-S1 and other Ghost Controls solar kits depend on sealed battery compartments. West Covina’s summer heat accelerates gasket drying, and the next rain finds a way in. Corroded terminals cause intermittent operation or a dead opener after a cloudy week. We clean the compartment, replace the batteries when needed, and install fresh seals so the next storm doesn’t repeat the failure.
- Remote receiver desynchronization after a power outage. A grid interruption can scramble the receiver’s memory on older Ghost Controls units. All remotes stop working even though the opener has power. Owners sometimes assume the board is dead and replace the entire operator. In most cases, we reprogram the receiver and re-learn every transmitter, which takes under an hour and avoids a thousand-dollar replacement.
- Solar charging quirks on shaded hillside lots. South Hills properties with north-facing gates get less direct sun than the panel needs. The opener works fine in summer and dies in winter. We check the panel angle, clean the cells, and where needed move the panel or add a secondary charging source. It’s a site-specific fix, not a part swap.
Ghost Controls Parts & Our Repair-vs-Replace Approach
We carry the Ghost Controls parts that fail most often in West Covina: replacement control boards for the AXDP and TDS2XP lines, sealed limit switch sets, remote transmitters, battery tray leads, and solar charge regulators. If you have a dead arm motor on a ten-year-old unit with an obsolete board, we’ll give you the honest math. Piecing together a new motor, board, and receiver on an old chassis often costs more than a complete new opener kit. We write both options in the quote and let you choose. We don’t push replacement when a $70 limit switch fixes the problem, and we don’t patch a unit that’s going to fail again in six months.
If your Ghost Controls opener needs a motor repair, remote control reprogramming, or a battery backup addition, call (925) 268-7956 and we’ll give you a straight answer on parts availability and cost before you commit to anything.
Our Ghost Controls Service Process – Step by Step
- 1
Diagnosis. The technician checks the control board LED status, limit switch positions, battery voltage, and remote receiver signal at the opener. We look for the Ghost Controls-specific failure patterns we’ve described above, not generic guesses.
- 2
Written quote. You get a written price before any work starts. The number doesn’t move at the door. If we find a secondary issue during the repair, we explain it and get your approval before touching it.
- 3
Repair or replacement. We install OEM or quality aftermarket parts, seal all enclosures against West Covina’s weather, and route wiring out of the way of the moving gate. We don’t leave loose wires or half-tightened brackets.
- 4
Testing under load. After any Ghost Controls service, the tech cycles the gate at least a dozen times, including obstruction-reverse tests. On a hillside gate, we cycle it with the leaf riding the slope to confirm the motor isn’t straining.
- 5
Written warranty. Every Ghost Controls repair carries our 365-Day Done Right Promise in writing. If the same fault returns inside a year, the second visit is free.
See the difference
Before
After
Before
After
Before
AfterGhost Controls Products We Service & Install in West Covina
We service and install the full range of Ghost Controls residential gate equipment, including the TDS2XP dual swing gate opener kit, the TSS1XP single swing opener, the AXDP dual automatic opener, and the RTE-S1 retractable solar opener. We also work on their remotes, keypads, vehicle sensor accessories, and battery backup systems. We carry common Ghost Controls accessories locally so most repairs don’t wait on a parts shipment.

We Also Service These Brands
Ghost Controls is one of nine gate motor brands we service. We also repair and install LiftMaster, Mighty Mule, and DoorKing openers across West Covina, and offer Gate Repair for all major brands. If you have a mixed setup or a different brand on a secondary gate, the same crew can handle all of it.
FAQs – Ghost Controls Gate Repair Service in West Covina
Three beeps on a Ghost Controls opener usually indicates an obstruction detection fault or a limit switch that’s out of range. The board thinks the gate is jammed or the travel limits are lost, so it refuses to run the motor. First, clear anything in the gate’s path. If the beeping continues, the limit switches likely need replacement and recalibration. Call (925) 268-7956 and we’ll diagnose it over the phone, then send a tech if needed.
Yes, if the opener is a 12V system with a battery compartment or a compatible auxiliary battery input. We install sealed lead-acid or lithium battery backups on Ghost Controls solar units regularly. The key is wiring it through the existing charge controller so the panel charges the battery correctly. We’ll quote the battery, tray, and wiring as a single written price before we start.
Probably not. Ghost Controls receivers can desynchronize from their remotes after a power interruption. The remote still transmits, but the receiver won’t recognize the code. We reprogram the receiver and re-learn all remotes in about an hour. If the remote itself is dead, we test it before selling you anything. Call (925) 268-7956 and we’ll walk you through a basic reset over the phone first.
Stray radio frequency interference can trigger Ghost Controls receivers in some West Covina neighborhoods. South Hills and Glendora homes near certain communication towers occasionally see phantom openings. The fix is usually changing the receiver’s frequency or installing a shielded antenna. We isolate the interference source and reconfigure the system so the gate only responds to your remotes.
It depends on the age and condition of the unit. If the arm motor failed but the board and receiver are recent, a motor repair makes sense. If the unit is older, the board is obsolete, and the limit switches are worn, a new Ghost Controls kit often costs less than the sum of those individual repairs. We quote both options honestly and let you choose.
Minor repairs like remote reprogramming or limit switch replacement typically run from $120 to $280. Control board replacement usually falls between $250 and $500 depending on the model. A full opener kit replacement on a dual swing gate typically ranges from $1,200 to $2,600 installed. You’ll get an exact written price before any work begins. Call (925) 268-7956 for a free estimate.
Book Your Ghost Controls Service in West Covina, CA
If your Ghost Controls gate is acting up, call (925) 268-7956. A live person answers, day or night. We’ll schedule the visit, send a background-checked tech in uniform, and put the price in writing before the work starts. Every repair carries a full-year written guarantee.
Written by Lonnie Burke, Owner at Carver Gate Repair West Covina, serving West Covina and Arcadia Ghost Controls service for over a decade.